| Contents | Description |
|---|---|
| Time base: | 20ns to 100ms per division |
| Trigger source: | CH1, CH2, EXT or free run |
| Trigger edge: | rising or falling |
| Trigger level: | full-screen adjustable |
| Step interpolation: | linear or smoothed |
| Markers for: | voltage and frequency |
| Input range : | 5mV to 2V/division |
| Input sensitivity: | 0.15mV display resolution |
| Auto set-up function and X10 option pre-trigger function. | |
| Readouts: | True RMS, dBV, dBm, p to p, Duty cycle, Frequency… |
| Recording length: | 4K samples / channel |
| Real time sampling frequency: | 1.25kHz to 50MHz |
| Sampling frequency for Repetitive signals: | 1GHz |
| Frequency range: | 0...1.2kHz to 25MHz linear or logarithmic time scale |
| Operating principle: | FFT (Fast Fourier Transform) |
| FFT resolution: | 2048 lines |
| FFT input channel: | CH1 or CH2 |
| Time scale: | 20ms/div to 2000s/div |
| Max. recording time: | 9.4hours/screen |
| Automatic data storage | |
| Automatic recording for more than 1 year | |
| Max. number of samples: | 100/s |
| Min. number of samples: | 1 sample / 20s |
| Markers for time and amplitude recording and display of screens recording and display of screens Specifications |
| Contents | Description |
|---|---|
| inputs: | 2 channels, 1 external trigger input. |
| Input impedance: | 1Mohm // 30pF |
| Bandwidth: | DC to 60 MHz ±3dB |
| Max. input voltage: | 30V (AC + DC) |
| Input coupling: | DC, AC and GND |
| Supply from USB port: | (500mA) |
| Minimum system requirements: | IBM compatible PC Needs Win98SE or higher SVGA display card (min. 800x600, 1024x768 recommended) |
| Mouse: | USB port 1.1 or 2.0 compatible. |
| CD Rom player includes: | USB PC oscilloscope 2 x 60MHz scope probe USB cable software on CD getting started manual translations on CD |